The T Square





Drawing squares or T squares, as they are termed, are made of wood, of hard rubber and of steel.



There are several kinds of T squares; in one the blade is solid, as it is shown in Figure 5 on page 20; in another the back of the square is pivoted, so that the blade can be set to draw lines at an angle as well as across the board, which is often very convenient, although this double back prevents the triangles, when used in some positions, from coming close enough to the left hand side of the board. In an improved form of steel square, with pivoted blade, shown in Figure 2, the back is provided with a half circle divided into the degrees of a circle, so that the blade can be set to any required degree of angle at once.



Fig. 2.


Fig. 3.


Fig. 4.






The Preparation And Use Of The Instruments The T Square facebooktwittergoogle_plusredditpinterestlinkedinmail

Feedback